Product Description

The HMV02.1R-W0015-A-07-FNN2 is an HMV power supply module from Bosch Rexroth. It is intended for use with power sections HMD and HMS. This supply unit is capable of supplying corresponding power sections with their rated current (input). The power supply utilizes a regenerative mechanism that safely transfers energy back to the grid while eliminating the extra cost and removing excess heat. The cooling mode utilized by the HMV02.1R-W0015-A-07-FNN2 is the internal air-cooling type with an integrated blower. The rated output of this equipment is 15 kW, and its approximate mass is 9.5 kg.

Under normal operating conditions, the permissible ambient temperature of this equipment has a maximum value of 40 degrees C. At reduced equipment specification, the operating surrounding air temperature of this unit is maximum at 55 degrees C. The operating frequency of the HMV02.1R-W0015-A-07-FNN2 is between 50 – 60 Hertz, and it has a tolerance of ±2. This equipment dissipates power up to 27 Watts at the input control voltage. The input voltage of this unit is 3-phased and within the range 380… 480 VAC. Also, the input voltage has a tolerance of ± 10%. In conformity with EN 60204 – 1, the wire size required for this unit is 6 mm². Also, the wiring is a Class-1 Cu material, and it has a conducting temperature of 60 to75 degrees Celsius.

The HMV02.1R-W0015-A-07-FNN2 has screw mains connection ports with a minimum tightening torque of 1.5 Nm and a maximum value of 1.7 Nm. Also, the 24 volts supply terminal on this equipment has a min. tightening torque of 5.5 Nm and max. tightening torque of 6.5 Nm. Its protection category is IP 20. This unit can be shipped globally with a one-year warranty period from Wake Industrial.