Product Description

The HMV02.1E-F0025-A-07-NNBN by Bosch Rexroth is a resource-optimized IndraDrive power supply unit. It utilizes an infeeding-type power supply mode and loses heat via liquid cooling. It belongs to the IndraDrive M family, its unit version is 01 and the design type is 02. The equipment features an output rated power of 25 kW, and a nominal voltage of DC 700 Volts. The design of the HMV02.1E-F0025-A-07-NNBN has an integrated braking transistor that supports dynamic braking and dissipates heat energy. This unit has a control voltage of 24V ±5 %.

The HMV02.1E-F0025-A-07-NNBN is suitable for use with HMS inverters, and it features electromagnetic compatibility, as per EN standards. For normal operations, this supply unit requires a 3-phase alternating current supply (380 – 480 Volts). The input current requirement of this equipment is 23 Amps, and it features an output direct current voltage rating of 750 V. Additionally, the HMV02.1E-F0025-A-07-NNBN has an output current of 20 Amps. The admissible temperature range for normal operations is between 0 – 40 degrees Celsius. With reduced data, the acceptable ambient temperature has a maximum value of 55 degrees Celsius. This unit dissipates energy to the tune of 500 W at continuous current.

The HMV02.1E-F0025-A-07-NNBN supply unit comes with an embedded network contactor to facilitate drive paths disengagement during installation and maintenance activities. The protection degree of this unit is IP 20, and it is protected against solids (D ³ 12.5 mm) but non-protected against water. In addition, its pollution degree is rated at 2, and it is suitable for use in areas where only non-conductive pollution and condensation-induced temporary conductivity occurs. The SCCR of the HMV02.1E-F0025-A-07-NNBN is rated 42,000 A_rms. This unit can be shipped globally with a one-year warranty period from Wake Industrial.