Product Description

The HMV01.1E-W0120-A-07-NNNN-AA is a power supply unit produced by Rexroth Indramat to supply drive controllers and servo motors with the electrical energy they require for optimum operation. This controller is designed for industrial environments as the low voltage supplied to residential areas can not support its application. The HMV01.1E-W0120-A-07-NNNN-AA power supply unit can be operated with different drive controller series such as the HMC, HSS and HMS drive controller. The operation of this supply unit is dependent on the temperature at which it is operated; thus, the HMV01.1E-W0120-A-07-NNNN-AA  power supply unit should not be operated in an industrial environment with an ambient temperature greater than 55 degree Celsius.

The HMV01.1E-W0120-A-07-NNNN-AA power supply unit connects to the mains through a three-phase electrical connection which allows it to receive electrical power more efficiently. The electrical wires used with the power circuit should have a minimum size of 95 millimetres square according to EN 60204. The wires used for the internal cabling of the power supply unit should have a size of AWG4/1, according to UL 508 A. An internal brake resistor is installed in the power supply unit to protect its circuit from over current, thus allowing the machine to operate for a long time without breaking down.

The HMV01.1E-W0120-A-07-NNNN-AA power supply unit has a short circuit current rating of 42000Amperes_rms. While using a control input voltage of about 24 volts, the power supply unit is designed to consume a rated power of 55 watts. The rated input current of the power supply unit is 204 Amperes, while the rated input voltage falls between 3 x AC 380 volts and 3 x AC 480 volts. This unit can be shipped globally with a one-year warranty period from Wake Industrial.