Product Description

The EFC5610-3K00-3P4-MDB-7P-NNNNN-L1NN frequency converter produced by Bosch Rexroth depicts a safe torque off design by means of a yellow STO connector. This design helps the converter to incorporate an optional safety feature. The configured links of the product must be removed if the STO feature is to be used. The device comes equipped with two nameplates. The unit should always be checked for deformation or loose parts before use. It features an absolute humidity of 1g/m³ to 60g/m³ and relative humidity of 5% to 95% during transport. The converter has to be run under power for at least an hour if it is stored for a long time without use.

The product should have neither icing nor moisture condensation on its surface during transport and storage. The device portrays a carrier frequency range of 1kHz to 15kHz. The start-up torque of this unit is 200% of rated torque at 0.50Hz. Its STO connector houses twelve bridged terminals for easy connection. The converter comes with five digital inputs supporting NPN and PNP wiring. The product features a RS 485 standard communication interface and a Modbus standard communication protocol for communication. The device is CE Certified and cUL Listed. The unit portrays an input current rating of 7.2A and an output current rating of 5.9A.

This device has a 7-segment display with a potentiometer. It features a 1% deration for every 100m increase in altitude above the standard elevation. The product deploys an enforced air cooling mechanism. The converter depicts an output capacity of 4.9kVA. The device is thermally dimensioned for the rated current. The output current of the unit gets lowered when the carrier frequency is high so that there is not much change to the power dissipation in the power section. The EFC5610-3K00-3P4-MDB-7P-NNNNN-L1NN converter has a year’s warranty and can be sent to any address of your choice.