The DKC03.3-040-7-FW is a servo drive controller manufactured by the company Bosch Rexroth Indramat. The device is an EcoDrive type 3 drive controller within the DKC series. EcoDrive type 3 is also known as EcoDrive03. An EcoDrive system is a smart and practical automation system suited for a various applications. DKC drives help create an efficient automation solution for industries that use handling and assembly systems as well as packaging and printing machines.
One of the best things about the DKC03.3-040-7-FW is that compared to competitors it provides a much more complete product. DKC drives include features that are usually reserved for more expensive models while maintaining a lower cost. This drive controller is compatible with many of the motors from Indramat including the MKD and MHD series. Some drives may need add-on accessories, such as sensor and actors, to fully control and monitor motors. DKC controllers monitor and adjust motors according to how they were programmed before installation. Preprogramming the drive makes sure that the automation system works for the users application.
The input current for the DKC03.3-040-7-FW is 40A. It also has a direct current input voltage of 700V. The mains frequency is between 50Hz and 60Hz. The device can operate at full capacity if the operating temperature is between 5 degrees Celsius and 45 degrees Celsius, but will still function up to 55 degrees Celsius. The storage temperature should be between -35 and 85 degrees Celsius. The maximum installation height of this drive is 2000m. The servo drive is also IP20 protected, meaning it has sufficient protection against dust ingress.
Here at WakeIndustrial, we supply our customers with the best depth of information making your buying decision easier. We understand the complexity of automation parts, thats why we always provide a thorough specification list and factory produced manuals for all of our products.DKC for Explosion Proof - Operating Manual.pdf DKC for Explosion Proof - Project Planning Manual.pdf DKC Synchronous Motors.pdf DKCType Code Explanation.pdf
|Servo Amplifier Drive Controller Unit||DKC|
|Voltage Rating||DC 700V|
|Nature of Firmware||Factory Assigned|
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2019 - Wake Industrial - All Rights Reserved