Reputable machine users and innovators rate Bosch Rexroth as among the few motion control manufacturing companies that understand fully the demands and challenges experienced in the field. With the integrated systems, modern facilities and increased use of modern technology, Bosch Rexroth has continued to thrive in offering not only exceptionally rugged and extreme products but also ultra-efficient and cost-effective ones. It does not matter whether you are looking for CNC, gearing, supply modules, servo motors, drive controllers, permanent magnetic motors, or servo drives, Bosch Rexroth got your back and you will get a component that you can configure to your particular industry needs.
The DKC02.3-016-7-FW EcoDrive’s maximum ambient temperature with nominal data stands at 400C the maximum allowable temperature with reduced cost-effective data is estimated to be 550C. The width of the unit is 55mm, the height is 182 mm while the depth is 170 mm. The estimated net weight of the device is 1.8kgs. The input number of phases is equal to the output number of phases which is 3. This unit has an input rated control voltage of 24 AC and a rated input voltage of between 200 to 230 AC. While the input frequency of the DKC02.3-016-7-FW is 50 to 60 Hz, the maximum output frequency is estimated to be 333.3 Hz. The unit’s short circuit current rating (symmetrical ampere) stands at 5000 W. During installation, Bosch Rexroth recommends that you leave a distance of about 50 mm on the bottom and top of this device and other devices.
The DKC02.3-016-7-FW unit’s branch protection fuse is 2 and the appropriate field-wiring material is 60/750C class 1 of copper wire or another equivalent.
|Servo Amplifier Drive Controller Unit||DKC|
|Voltage Rating||DC 700V|
|Firmware Version||Factory Assigned|
|Nature of Firmware||Factory Assigned|
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2019 - Wake Industrial - All Rights Reserved