Product Description

The Bosch DDS02.1-W150-DA02-00 is a digital drive controller. Its input is rated for 24 Volts DC. The controller can be powered from a power supply that delivers regulated DC output. The nominal output current rating of the DDS02.1-W150-DA02-00 is 150 Amps. The controller delivers rated output when the ambient conditions comply with those that are specified by the manufacturer. The specified ambient conditions include maximum 45 degrees Celsius temperature, maximum 1000 meters altitude and maximum 95% relative humidity. Operation of the DDS02.1-W150-DA02-00 outside specified ambient conditions not only leads to output derating but can also lead to controller malfunction and failure. The DDS02.1-W150-DA02-00 supports digital servo feedback and includes an Analog command communication module. The function ID of the controller is 02 and the function ID version is 00. Firmware for the drive has to be ordered separately from the hardware.

The firmware resides in the software module. This module can be copied to other software modules for rapid commissioning of drive controller. In case of drive failure or malfunction, the software module can be easily moved to a replacement drive. This allows minimization of system downtime and reduces the adverse effects on business performance. The DDS02.1-W150-DA02-00 cools via natural convection. The drive is designed with heat technology and dissipates heat within the control cabinet. Consequently large control cabinets and air conditioning may be needed for the maintenance of ambient temperature. Bosch has specified minimum mounting clearances of 80 millimeters on the top and bottom sides, and 22.5 millimeters on the rear side of the mounted controller. Dimensions of the DDS02.1-W150-DA02-00 controller are as follows: 355 millimeters height, 105 millimeters width and 325 millimeters depth. The DDS02.1-W150-DA02-00 mounts in the vertical orientation.