Product Description

The Bosch Rexroth CSH01.2C-NN-ENS-NNN-CCD-NN-S-NN-FW DAY advanced control section is a single-axis section. This section must be operated only along with the supporting drive controller. The product must be disconnected from electric power using a master switch and secured against reconnection when it is being cleaned or maintenance work is undertaken. This device must be mounted and transported using suitable equipment. The unit uses batteries to support the operation of its control panel. It has no safety technology. This section has a type plate on its housing for easy identification. The product has several digital inputs digital inputs some of which are combined inputs/outputs. This device is not designed to be mounted horizontally. The unit has two differential inputs to receive data and two inputs to transmit data on its cross-communication module. Its batteries should not be recharged as doing so can cause them to leak or explode. The control section uses a multimedia card to read and store firmware, drive parameters and operating data. This product has live connecting points for a brief period even after the power supply has been disconnected. The device has an overall height of 241 mm and must mounted in a power section of a bigger size. This unit is connected with its cross-communication interface at either the X24 connecting point or the X25 connecting point. It should be handled with utmost care to avoid the possibility of the section getting damaged. The section is intended to be operated only after establishing the appropriate grounding connection. This product operation is permitted only with the specified firmware. The section is largely used in machine tools.