Product Description

The Bosch CSH01.1C-PB-EN2-MEM-MA1-S2-S-NN-FW is an advanced and configurable control section. It performs all the processing-related functions of IndraDrive controllers. The two essential components of each controller are a power section and a control section. Each control section is an independent component that plugs into the power section. The control section is supplied ex-works as part of a complete controller. In some cases the control section is delivered separately. In such cases the power section and control section are plugged together. To prevent hardware damage, the number of plug-in actions is limited to 20. The CSH01.1C-PB-EN2-MEM-MA1-S2-S-NN-FW operates at 24 Volt DC. The power draw of the control section basic unit is 7.5 Watts. The total power consumption depends on the installed modules and their respective power consumption. The CSH01.1C-PB-EN2-MEM-MA1-S2-S-NN-FW is susceptible to electrostatic charges.

Therefore any exposed conductive parts that can come into contact with the device should be grounded to discharge any potential. Examples of such conductive parts are tools, parts and the human body. Controllers that include the CSH01.1C-PB-EN2-MEM-MA1-S2-S-NN-FW must only be used for approved applications that include machine tools, paper machines and handling systems. Incorrect use of the product can cause injury and personal damage. Bosch is not liable for improper product use. If a product is faulty then it must not be used or operated. The CSH01.1C-PB-EN2-MEM-MA1-S2-S-NN-FW features several pre-installed modules including encoder EnDat 2.1, encoder emulation an analog I/O extension. The CSH01.1C-PB-EN2-MEM-MA1-S2-S-NN-FW also features a pre-installed safety module with safe motion support. A standard control panel is used for configuration and monitoring. In order to be recognized, the control panel has to be connected to the CSH01.1C-PB-EN2-MEM-MA1-S2-S-NN-FW before the unit is powered on.