The ADF160B-B05TB1-BS06-A2N1 is a main spindle motor with a nominal power rating of 40 kW and a motor size of 160. Manufactured by Bosch Rexroth for a wide range of digital servo and liquid-cooled spindle drive applications like printing and textile machines, it features a flange mounting design and no holding brake. The unit features an above power connection position, with the power connector's output direction located at the terminal box, output direction side B. This is the power terminal of the ADF160B-B05TB1-BS06-A2N1 spindle motor, which acts as the connector for the motor NTC thermistor, and if there was one, holding brake.
The power terminal's position cannot be changed, and only the cable output direction of the power connector can be adjusted by 90 degrees after the motor has been delivered. The ADF160B-B05TB1-BS06-A2N1 main spindle motor is also protected from ambient conditions like external objects and water. It also features a contact guard, covering the engine from coming in contact with other moving objects. The main spindle motor has a minimum core diameter of 35mm2, which is only suitable for Indramat motors.
Each part of the ADF160B-B05TB1-BS06-A2N1 falls in a different protection category. The power connector, motor feedback connector, and side B shaft end all have total protection and are dust-proof. They also have protection from jets of water sprayed on the housing and from all directions. It does not allow any damages caused by water. Only the output shaft, which is without a sealing ring, has a different protection category. It is protected against dust deposits and has total protection against penetration. It is also protected against splash water and water sprayed on the housing. This unit can be shipped globally with a one-year warranty period from Wake Industrial.