Product Description
The 2AD132B-B35OR2-BS03-D2N1 asynchronous AC motor provided by Bosch Rexroth is compatible with the manufacturer's DIAX, INDRADRIVE, or ECODRIVE drive controller. This motor delivers a drive solution with open functions when it is operated with the drive controller. The product must be installed as mentioned in its documentation. This device is widely used in machine tools. This device is not supposed to be used when there is an extreme temperature fluctuation. The unit may need up to 140 minutes to cool down after the operation period. It must be mounted taking into consideration the specified tolerances. This motor is supposed to be connected only after its mechanical mounting has been done.The product must have all its plug-in connections firmly secured in place when the machine in which it is installed is in use. This device is intended to be connected as per the installation circuit diagram of the machine manufacturer.
The unit incorporates a power connector with threads. Its blower must be checked for proper functioning periodically after a year. This motor-related connectors should be connected and/or disconnected only in a dry and de-energized state. The product should not be clamped or jammed during the handling and mounting process. This device must be protected against mechanical damage and moisture during storage by using the provided plastic protective sleeves.The motor has to be kept free of load when it is transported. This unit has no second shaft end. Its output shaft is positioned on side A. The product has an IP 65 protection rating for its power and feedback connections. This device is completely protected against the penetration of dust. The unit incorporates NTC type thermistors in its windings. Its electrical connection is established through a terminal box. This asynchronous AC motor has no encoder connection.
Wake Industrial Warranty
