2AD104D-B35OC1-FS07-B2N1

Product Description

2AD104D-B35OC1-FS07-B2N1 is the servo motor manufactured by Rexroth Bosch Group that has a variety of applications. The rated torque of this motor is 64 Nm and it remains the same even at a standstill state. This means that the value of rated torque and standstill continuous torque is similar. 

The speed at which the motor delivers its rated power output with the most efficiency and without exceeding limits is 1800 revolutions per minute and the derating speed is the same as the rated speed. However, the maximum speed of the motor is 9,000 revolutions per minute but it’s suggested to operate the motor at rated speed to extend its life and maximize productivity. The rated power consumption is 12.1 kW and the moment of inertia of the rotor is 0.027 kgm2. The noise level at 1 m distance with 4 kHz Pulse Width Modulation (PWM) is 70 dB (A). The 2AD104D motor can continuously handle a maximum current of 29.0 A under normal operating conditions. These current ratings remain the same even when the motor is at a standstill state. This motor can be attached to any surface through flange or foot mounting. This means that this motor can be installed easily in industrial settings where space is less such as pumps, blowers, and machine tools. 

The power terminal is located on the top of the motor. The cooling of the motor is carried out with the help of axial blowers that operate at 230 AC voltage while consuming 60 VA power. The medium air volume of the motor blower is 230  m3/h and the nominal voltage is 230 V or 115 V. 2AD104D has no holding brake but is equipped with digital servo feedback with an integral multiturn absolute encoder. The output shaft has no seal but is balanced with an entire key.