Product Description

CP2615-0000 is engineered by Beckhoff Company. It is a panel PC that is designed for industrial applications in areas such as machine and plant engineering. The Panel PC can only be operated by a trained engineer in the control and automation field. This new generation comes with a top-tier multi-touch TFT display. It provides an economical solution since it consumes less energy. It comes with numerous benefits such as clamping levers that are easy to remove, lithium battery of the system clock that is accessible from the outside, and an accessible MicroSD Flash Card.

Installation of the CP2615-0000 should be done at the front side of the control cabinet and should be far from direct sunlight and reflections. When mounting, you should provide ample space for maximum ventilation. It is recommended that you leave a space of 5cm above and below the housing. The air inside the enclosure should be free from moisture, dust, and extreme heat. Avoid using the panel in environments where the risk of explosion is high. Some of the LED indicators include red which indicates stop mode, green for run mode, and blue for configuration mode.

CP2615-0000 weighs 3.7kg, has a supply voltage of 24V DC (20.4 – 28.8V DC), and has 20W power consumption with 15” display. Before operation begins, allow it to slowly adjust to the room temperature. Proper earthing which dissipates interference from supply cables, signal cables, or cables to peripheral equipment should be observed. The ambient conditions include storage and operating temperature range of -25 to 65 degrees (s) and 0 to 55 degrees Celsius (o) respectively. Get this Beckhoff Panel PC from Wake Industrial. For peace of mind, it comes with a year's warranty.