T850-092E5A Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki T850-092E5A is part of the T SANMOTION Servo Motors series and provides a rated output of 500 W with a continuous duty rating. The servo motor operates on a 75V winding specification, has a permanent magnet excitation system, and features IP43 protection. Its outer diameter is 87.5 mm, with a lead wire length of 1000 mm, and supports ambient humidity from 20 to 90 percent RH.
Internal Product Review
The T850-092E5A is a Sanyo Denki T SANMOTION servo motor rated at 500 W for continuous S1 duty. Permanent-magnet excitation and IP43 protection support stable motion performance in enclosed industrial equipment. Electrical integrity is reinforced by 1500 VAC dielectric strength and 10 MΩ minimum insulation resistance, making the motor a dependable choice for servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The T850-092E5A is a servo motor produced by Sanyo Denki for the T SANMOTION Servo Motors series. It is intended for industrial automation tasks that demand precise positioning and velocity control, such as pick-and-place stations, small conveyor drives, and packaging axes. By converting electrical energy into controlled rotary motion, the motor integrates with matching drives to form closed-loop motion systems across manufacturing cells and test equipment.
The motor delivers a rated mechanical output of 500 W, which is the maximum continuous shaft power it can supply at thermal equilibrium. This capability is paired with a continuous S1 duty rating, enabling indefinite operation at the rated load. Acceptable operating conditions include a relative humidity range of 20% to 90% RH, which helps prevent moisture-induced insulation degradation when observed. The aluminum housing has an IP43 protection rating, blocking tools or wires larger than 2.5 mm and withstanding angled water spray encountered inside machinery enclosures. A frame outer diameter of 87.5 mm establishes the flange dimensions and supports torque density calculations. The electrical configuration uses a 75 V series winding, matching drives that supply the appropriate bus voltage.
Electrical integrity is supported by a dielectric strength of 1500 VAC for 1 minute, allowing the stator insulation to withstand high-voltage testing during inspection or maintenance. The insulation resistance is a minimum of 10 MΩ when measured with a 500 V megohmmeter. Factory lead wires extend 1000 mm, simplifying routing to terminal blocks without requiring additional joints. Torque production relies on a permanent-magnet excitation system, which eliminates field-winding losses and supports a fast dynamic response. The winding works with the magnet circuit to reach the rated speed while keeping current within the limits of a compatible servo drive.
