T511-012 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki T511-012 is a servo motor from the T SANMOTION Servo Motors series with a flange size of 51 mm and a mass of 0.95 kg. It provides a rated output of 0.11 kW, rated speed of 3000 min^-1, and a rated torque of 0.34 N·m. This motor features an IP43 protection rating and a 1000 mm lead wire length.
Internal Product Review
The T511-012 is a Sanyo Denki T SANMOTION servo motor with a rated output of 0.11 kW and a rated speed of 3000 min^-1. Strong torque density stands out, with 0.34 N·m rated torque and 3.4 N·m peak stall torque supporting responsive motion performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The T511-012 is a brushless servo motor produced by Sanyo Denki within the T SANMOTION Servo Motors series. Designed for closed-loop positioning and speed regulation, the unit couples with a matching amplifier to drive pick-and-place arms, indexing tables, and other automated axes where compact size is critical. Its 51 mm flange and lightweight frame allow it to fit into confined spaces and small mechanical assemblies. The motor provides controlled rotary motion for applications that require accurate changes in position, speed, and torque.
Under continuous load, the rotor can deliver 0.42 N·m of stall torque while maintaining thermal equilibrium. When the shaft operates at the rated speed of 3000 rpm, the motor produces 0.34 N·m of running torque and draws 2.0 A from a 75 V armature supply. The magnetic circuit converts input current into mechanical torque with a constant of 0.21 N·m/A, allowing the drive to estimate output torque from phase-current feedback. A voltage constant of 21.8 × 10⁻³ V per rpm indicates the back electromotive force that the controller must overcome as speed increases. Friction torque is 0.022 N·m, which helps reduce heat generation while the shaft is held at a standstill. The housing has an IP43 rating, providing protection against solid objects larger than 1 mm and water spray within the limits of that enclosure class.
Dynamic events are supported by a peak stall torque of 3.4 N·m, giving the axis short bursts of additional force during rapid indexing. Rated mechanical power reaches 0.11 kW, making the motor suitable for small conveyors or actuators that require moderate output. Acceleration response benefits from a rotor inertia of 0.37 × 10⁻⁴ kg·m², allowing the shaft to follow rapid speed changes with less resistance to acceleration and deceleration. The cylindrical mounting interface supports straightforward alignment with compatible machine components. The motor weighs 0.95 kg, reducing the load added to compact moving assemblies and robotic arms. A fixed lead set measuring 1000 mm eliminates an additional connector near the motor and helps preserve shielding continuity along the cable route.
