Product Description:

The 103H89583-8213 StepSyn Stepping Motor is engineered for precise control in industrial environments, delivering synchronous operation with a consistent speed that is directly proportional to AC power frequency. Designed to eliminate slip under varying loads, this motor integrates seamlessly into a variety of applications. With an operating temperature range from -10°C to +50°C, it maintains reliable performance across different environmental conditions. It is widely used in industrial applications like conveyor drives, printers, cryopump freezers, and other general industrial devices. The design ensures it operates without any issues under 50/60Hz, 1KV AC for 1 minute while maintaining a low leakage current of approximately 1mA.

The StepSyn motor achieves synchronous performance, ensuring that rotational speed remains constant, proportional through the AC power provided, without needing a separate driving circuit. The design transforms from the typical stepping motor to a synchronous one by replacing the wound-wire for AC power, further enhancing its efficiency, so that there is no need for addition setup complication. This motor's pull-out torque typically ranges from 0.568 N·m to 5.5 N·m, depending on the particular model, demonstrating its capability to handle different load requirements. It is designed to run at roughly 72 rpm at 60Hz and about 60 rpm at 50Hz with an ambient humidity range from 20% to 95% RH without condensation, which helps to ensure the long lifespan of the product through all kinds of climates.

Suitable for demanding operations found through diverse industries, the Sanyo Denki stepping motor suits machines like conveyor drives and cryopump freezers. Rated voltage differs through each model, but common ratings normally are inside the range from 100 to 220 VAC.