Product Description:

The new 103H8581-70XE43 variant represents the Sanyo Denki's StepSyn series of stepping motors. The drive employs a StepSyn type Stepping Motor that is capable of achieving precise and repeatable movements. Its rated voltage is presented at 5.1 V DC and indicates that it has a stable power supply. The motor’s rated current of 1.0 A ensures efficient energy consumption as well as consistent performance. With a step angle of 1.8° per step, the device improves its positioning accuracy.

Additionally, this stepping motor has a holding torque of around 0.80 Nm which allows for steady retention of loads. Moreover, the detent torque of close to 0.40 Nm helps to reduce uncontrolled motion. It has 2 Phase bipolar configuration which provides balanced excitation for smoother operation. According to the industrial standards, the frame size is NEMA 17 which is easier to integrate into settings. The shaft diameter of 5 mm enables strong mechanical coupling while the operating temperature range, –10°C to 50°C, guarantees functionality in varied industrial environments.

This particular 103H8581-70XE43 model is aimed for greater effectiveness; this characteristic aids in reducing energy waste while functioning. It has a mass of about 0.7 kg; this low weight contributes to fast-paced action in automated systems. Furthermore, the motor's RPM rating is 1500 which facilitates quick gearing when required. The approximate value of the motor’s winding resistance is 5.1 Ω and such value makes sure there is limited current flow. This device is also capable of up to 16 microsteps per each full step in order to assure the control of motion will be more accurate.