103H8222-5111
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The 103H8222-5111 stepping motor boasts a step angle of 1.8°, a voltage rating of 24V, bipolar phasing, and a current per phase of 4.00 amps. Part of the StepSyn Stepping Motors series by Sanyo Denki, it features a double shaft holding torque and a compact motor diameter of φ86.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
103H8222-5111 is a two-phase stepper motor. It is produced by Sanyo Denki for industrial use. The motor works with a compatible driver that provides electrical pulses to drive the motor. Each pulse makes the motor move through one step. For this motor, the basic step is 1.8 degrees. This means the motor shaft rotates by 1.8 degrees each time it receives an electrical pulse from the motor driver. Stepper motors provide accurate position control without position sensors and hold their position. The holding torque rating of the 103H8222-5111 motor is 5.09 Nm. Its rated current per phase is 4 Amps. The per phase winding resistance is 0.7 Ohms and the per phase winding inductance is 5.7 millihenry. Inertia of the motor rotor is 2.8 x 10-4 kg m2.
Mass of the 103H8222-5111 motor is 2.5 kilograms. The motor has a circular shape with 86 millimeters diameter. The square-shaped motor flange provides a means for secure installation. Its size is also 86 millimeters. The motor has a double shaft and the shaft diameter is 9.5 millimeters. Length of the stepper motor is approximately 125 millimeters. The recommended size for the lead wire is AWG 22. Stepper motors are suitable for applications that require precise position control. These motors have a brushless design for safety and high reliability. The lack of a position sensor reduces size and weight of the motor, and also reduces its cost. Stepper motors deliver high torque at low speeds, hold position, and are reliable with a long operating lifespan. Compared to traditional rotary motors, stepper motors require lower control effort. These feature make stepper motors an ideal choice for a wide range for applications.
Frequently Asked Questions about 103H8222-5111:
Q: What type of shaft does the motor have?
A: The motor has a double shaft.
Q: What type of winding does the motor have?
A: The motor has a bipolar winding.
Q: What is the motor flange size?
A: The motor flange size is 85.85 millimeters.
Q: What is the motor weight?
A: Weight of the motor is 2.5 kg.
Q: What is the shaft diameter?
A: The shaft diameter is 9.5 millimeters.
