103H7852-7051 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki 103H7852-7051 stepping motor is part of the StepSyn Stepping Motors series and operates at a source voltage of DC24V. It features an automatic current reduction function, pull-out torque of 0.98 N·m, and a rotor inertia of 0.4×10⁻⁴ kg·m². The motor weighs 0.78 kg.
Internal Product Review
103H7852-7051 is a compact stepper motor. It works in combination with a stepper drive. This combination providers an optimal solution for precise position control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
103H7852-7051 is a 5-phase compact stepper motor. It is designed by Sanyo Denki, a Japanese company known for producing a wide range of industrial equipment, such as motors, cooling fans, and power supplies. The company has a strong focus on developing products for automation, energy efficiency, and environmental sustainability. The motor moves in discrete steps rather than continuously. A feature of stepper motors is position control without position sensors. The motors are designed to advance by a single step whenever they receive an input pulse. The pulses are transmitted from a stepper drive connected to the motor. The pulse duration and frequency determine the number of steps moved. Each stepper motor has a defined step size. Operators can order motors with the step size that suits application requirements.
Step size for the 103H7852-7051 motor is 0.72 degrees. This means the motor goes through 500 step for each complete 360-degree revolution. Holding torque of the motor is 0.98 Nm. The rated current is 0.75 Amps per phase. The wiring resistance is 3.4 Ohms per phase. Inductance of the motor winding is 7.75 millihenry per phase. Rotor inertia for the 103H7852-7051 motor is 0.4 x 10-4 kg m2. The motor has a weight of 0.78 kilograms. Diameter of its single shaft is 8 millimeters. Approximate length of the motor housing is 53.8 millimeters. The stepper motor has a flange with 60 millimeter dimensions. Each of the four holes on the flange have a 4.5 millimeter diameter. As the motor is designed for industrial use, it should be handled by trained staff. This is also necessary for ensuring proper installation and operation as per technical standards and recommendations.
