103H7833-0310 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki 103H7833-0310 motor is part of the StepSyn Stepping Motors series and features a step angle of 1.2° per step. It operates with a rated current of 3A/phase and has a holding torque of 1.68 N·m. This motor weighs 1.34 kg and can function within a temperature range of -10°C to +50°C.
Internal Product Review
103H7833-0310 is a stepper motor with precise movement. It features position control without feedback. In combination with a driver it provides reliable and accurate positioning for industrial applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
103H7833-0310 is a 3-phase stepping motor. It is produced by Sanyo Denki for industrial use. The motor differs from traditional motors in that it moves in discrete steps rather than continuously. Sanyo Denki manufactures stepper motors with different step sizes, dimensions, and holding torques. Basic step size of the 103H7833-0310 motor is 1.2 degrees per step. This means the motor shaft rotates 1.2 degrees for each input pulse. A stepper driver supplies controlling pulses to the motor. The number of pulses and their frequency determines the movement of the motor. To go through one complete revolution, this motor has to go through 300 steps. At each step the motor can hold its position and its holding torque rating is 1.68 Nm. Additional performance specifications include 3 Amps per phase rated current and 2 Ohms per phase wiring resistance.
The per phase wiring inductance for the motor is 3.2 millihenry. The specified rotor inertia is 0.84 x 10-4 kg m2. Weight of the 103H7833-0310 motor is approximately 1.34 kilograms. The stepper motor has a double shaft. Its length is approximately 85.8 millimeters. Each side of the square motor flange measures 60 millimeters. Diameter of the motor shaft is 8 millimeters. There are four mounting holes on the motor flange. The diameter of each of these holes is 4.5 millimeters. Appropriately sized mounting screws can be used for mounting the motor to the machine. PMDSA1S3P01 is a driver with photo coupler input that can be used to the drive the stepper motor. PMDSA1S3C01 is a driver with CMOS input that can also be used to drive the stepper motor. Installation by qualified professional is recommended to prevent errors.
