103H7522-7021
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships in 3 Days
The 103H7522-7021 StepSyn stepping motor features a 5-phase design, a step angle of 0.72°, a holding torque of 0.735 N·m, and weighs only 0.6 kg (1.32 lbs). Part of the StepSyn Stepping Motors series by Sanyo Denki, it offers compatibility with various drivers and supports both single and double shaft configurations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
103H7522-7021 is a 5-phase stepping motor. It is designed by Sanyo Denki for industrial use. A major benefit of stepping motors is sensorless position control. The motors are designed with a basic step size that is measured in degrees. At each application of an input voltage pulse, the motor advances by a single step. A controller or stepping driver supplies the control pulses that enable step motor position control. 103H7522-7021 is a motor can that be used with 5-phase stepping drivers from Sanyo Denki. These compact drivers enable signification volumetric rate reduction and smooth operation at low speeds. The drivers support motor power OFF, current switchover, pulse input selection and step angle configuration. Dimensions of the 103H7522-7021 motor are 60 millimeters and is basic step size is 0.72 degrees.
Its rated holding torque at five-phase energization is 0.735 Nm or more. The per phase current rating is 0.75 amps. The per phase winding resistance is 3.3 Ohms. The per phase wiring inductance is 7.5 millihenry. Shipping weight of the motor is approximately 0.6 kilograms and its rotor inertia is 0.18 x 10-4 kg m2. The motor has a double shaft. Its line wire specification is UL1430 AWG 24. Mechanical dimensions of the motor include 53.8 millimeters length, 8 millimeters shaft diameter, 4.5 millimeters mounting hole diameter and 60 millimeter flange size. The flange is a rectangular plate at one of the motor housing. It has holes for mounting screws and is designed to provide a method for secure motor mounting. Several drivers can be used with the motor and details are available in the relevant product documentation. Only qualified personnel should use the motor.
Frequently Asked Questions about 103H7522-7021:
Q: What is the operating temperature?
A: The operating temperature is 0 to 50 degrees Celsius.
Q: What is the range for relative humidity?
A: The relative humidity range is 30 to 85%.
Q: What are the motor dimensions?
A: The motor dimensions are 60 millimeters.
Q: What is the motor weight?
A: The motor weight is 0.6 kilograms.
Q: What is the basic step size?
A: The basic step size is 0.72 degrees.
