Product Description:

Sanyo Denki has been a leading producer of state-of-the-art machines that function as motion and motion control devices in industrial systems. With more than five decades of experience, the company has developed a production system that allows it to produce millions of high-quality and low-cost machines for industrial applications. The 103H7123-04B1 is part of the StepSyn stepping motor series from a reputable company; it is an extremely small motor that has a square housing and is able to produce high torque levels at relatively reduced speeds. This motor design is mostly covered by a chemically resistant black varnish that protects its housing from rust and weathering when exposed to liquids. The 103H7123-04B1 is a single-shaft design; its integrated shaft has a flat design and can support relatively high loads.

The 103H7123-04B1 does not contain any sensor or integrated enclosure; however, it is still a very accurate product that functions at a step angle of 1.8 degrees per revolution. The input voltage required for the proper operation of this stepper motor is measured to be approximately 2 amperes. Environmental temperature around this stepper motor during its operation should not be allowed to exceed 45 degrees Celsius, and humidity levels should also be kept below 95 per cent. The 103H7123-04B1 does not require a control cabinet for additional production; however, it should be used indoors and be shielded from extreme vibrations.

The 103H7123-04B1 operates with an holding torque of 0.83 newton meters, the input voltage required for its operation is also about 6.70 volts. The maximum installation height for this product is about 1000 meters above sea level, and it also weighs approximately 1.43 kilograms. Wake Industrial provides this product with a 12-month warranty.