103H7123-0410
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The Sanyo Denki 103H7123-0410 is a robust unit in the StepSyn Stepping Motors series, operating at 24 VDC with a 2A per phase current. It features a holding torque of 0.83 N·m and weighs 0.65 kg. With IP40 protection, axial play of 0.075 mm, and a static angle error of ±0.054°, this motor is precise and reliable.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 103H7123-0410 from Sanyo Denki is stepping motor. The package should be unpacked with the correct side facing up. It is crucial to avoid damage to the internal motor parts. You are required to verify that the product that you have got is the same one that you have bought. Incorrectly installing a product might result in harm to the system. The insulation resistance or dielectric strength of the 103H7123-0410 motor should not be measured by the individual who is responsible for the wiring. In the event that this is not followed, the product (stepping motor) may be damaged. Work on the wiring must be carried out in accordance with the local requirements for electrical installations. Failure to adhere to this may result in the motor burning out or catching fire.
Wiring must be performed in a secure and accurate manner. There is a possibility that the Sanyo Denki stepping motor may become uncontrollable due to improper wiring, which might result in damage. It is necessary to insulate the condenser connection terminals that are connected to the external resistance. Should this not be followed, you may get an electric shock. It is imperative that the power be turned off quickly and that the cause be eliminated when the protection mechanisms of the motor are engaged.
In the event that the operation is continued without the possibility of removing the reason, the Sanyo Denki product may work incorrectly, which may result in harm or a breakdown of the system devices. It is possible for the Sanyo Denki stepping motors to step out while they are running and whenever they are stopping, depending on the amount of load.
Frequently Asked Questions about 103H7123-0410:
Q: What is the source voltage of the 103H7123-0410?
A: The source voltage of the 103H7123-0410 is 24 VDC.
Q: What is the operating current of the 103H7123-0410 motor?
A: The operating current of the 103H7123-0410 motor is 2 A per phase.
Q: What type of energization does the 103H7123-0410 motor use?
A: The 103H7123-0410 motor uses 2-phase, full-step energization.
Q: What is the rotor inertia of the 103H7123-0410 motor?
A: The rotor inertia of the 103H7123-0410 motor is 0.21 × 10⁻⁴ kg·m² (1.15 oz·in²).
Q: What is the holding torque of the 103H7123-0410 motor?
A: The holding torque of the 103H7123-0410 motor is 0.83 N·m (117.5 oz·in).
