103H5510-7040
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships in 3 Days
The 103H5510-7040 stepping motor offers a holding torque of 0.255 N·m, an operating current of 0.75A per phase, and a rotor inertia of 0.065×10^-4 kg·m². Part of the StepSyn Stepping Motors series by Sanyo Denki, it is built for reliability with a temperature range of 0°C to +50°C and vibration resistance between 10 to 55 Hz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
103H5510-7040 is a stepper motor from Sanyo Denki. For each motor, the basic step size is defined in degrees per step. These brushless motors typically do not require feedback for position control. Instead, these stepper drivers transmit electrical, and each pulse causes the motor to move through one segmented step. The pulse width and frequency can be varied to control the number of steps moved and the frequency of movement. 103H5510-7040 is a 5-phase Sanyo Denki stepping motor. Its step size is 0.72 degrees. Holding torque of the motor at 5-phase energization is 0.255 Nm. Rated current of the motor is 0.75 amps and the resistance is 2.2 Ohms per phase.
The specified inductance is 2.2 millihenry per phase. Rotor inertia for the motor is 0.065 x 10-4 kg m2. Weight of the 103H5510-7040 stepper motor is approximately 0.37 kilograms. Applicable motor drivers include PMM-MA 50034, PMM0BA 5603/5643, PMDPC1S3P01, PMM-MD-53030, and PMDPA1C3P50. The motor has a single shaft. Four M3 size screws are required for its mounting. The tap depth is 4 millimeters. The size of the lead wire is AWG 26. The size of the flange on the motor is 42 millimeters. The length of the motor is approximately 48 millimeters. Plastic dips switches are provided on the motor for configuration. Proper installation is essential for error-free operation. The motor is a compact piece of equipment that requires precise installation. This is only possible when the installation is performed by qualified personnel. Improper installation can not only affect performance, but it can also damage equipment and render it inoperable.
Frequently Asked Questions about 103H5510-7040:
Q: What is the motor flange size?
A: The motor flange size is 42 millimeters.
Q: What is the motor weight?
A: Weight of the motor is 0.37 kilograms.
Q: What is the length of the motor?
A: Length of the motor is 48 millimeters.
Q: How can you configure the motor?
A: DIP switches allow motor configuration.
Q: Does the motor have a single shaft?
A: The motor has a single shaft.
