103H5508-70E3 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki 103H5508-70E3 motor is part of the StepSyn Stepping Motors series and features a 2-phase synchronous design. It offers synchronous pull-out torque up to 5.5 Nm., a rotational speed of about 72 rpm at 60Hz, and operates directly on commercial AC power. The motor weighs approximately 0.65 to 2.5 kg.
Internal Product Review
The 103H5508-70E3 is an industrial motor unit built according to international quality standards. This motor is a stepper motor, it has an extremely small size and can produce a relatively high torque levels. The motor operates with an input current of about 0.75 amperes and is able to operate at a step angle of about 0.72 degrees per step.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 103H5508-70E3 is an extremely small motor unit designed with sophisticated technology and characterized by its unique low speed and high torque operation. The motor is manufactured by Sanyo Denki, one of the top producers of stepper motors in the world. During operation, this stepping motor only requires about 0.75 amperes of input current; it also operates at a steep angle of 0.72 degrees per step. The micro-stepping technique of this motor offers several industrial advantages, including increased resolution, smoother motion, lower vibration, and lower mechanical noise levels. The high precision level of this product is also due to its micro-stepping operation. The 103H5508-70E3 stepper motor is not equipped with a servo motor; also, it only requires a power supply cable for operation in servo systems.
The 103H5508-70E3 does not contain any air blower integrated into its housing; it produces a relatively low amount of heat and is able to maintain cool operation through a combination of natural convection and thermal radiation. The recommended ambient temperature levels that should be maintained around this motor unit when it is in active operation should be between -10 to about 50 degrees Celsius; a wider temperature level is permissible during the storage or transportation of the stepper motor. The housing of the 103H5508-70E3 is not able to prevent water penetration; operators are required to ensure that the motor is not exposed to extreme humidity levels.
The 103H5508-70E3 stepper motor is sold with a 12 month warranty period provided by Wake Industrial, and the delivery of the product is done through FedEx, UPS, or DHL. Installation levels should be maintained below 1000 meters above sea level; the operation of this product at higher altitudes might cause a reduction in efficiency level.
