103-814-6510 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki 103-814-6510 is a stepping motor that belongs to the StepSyn Stepping Motors series and features a gear ratio of 1/10. It delivers a stall torque of 2.1 Newton-meters and has a step angle of 1.8 degrees. The motor operates at a current of 4.6 Amps, has a winding type B, a mass of 4.15 kilograms, and is rated for IP43 protection.
Internal Product Review
The 103-814-6510 is a Sanyo Denki StepSyn stepping motor with B winding and a 1.8° step angle. Technical performance is especially appealing, with 2.1 N·m stall torque and 4.6 A current supporting steady indexed motion. IP43 protection makes the motor a strong choice for enclosed industrial positioning systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 103-814-6510 is a geared stepper unit manufactured by Sanyo Denki for the StepSyn Stepping Motors series. It combines a hybrid stepping motor with an inline reducer, allowing indexing motion to be delivered directly to lead screws, small conveyors, and rotary tables without separate external gearing. The unit is intended for incremental position control in material-handling equipment, light-assembly stations, and other automated machinery. Its integrated arrangement reduces the number of mechanical components required between the motor and the driven load.
The winding draws a phase current of 4.6 A, which indicates the amplifier output needed to produce full rated torque. When energized, the shaft provides a holding torque of 2.1 N·m for static positioning and low-speed feed operations. Each electrical step advances the rotor by 1.8°, so 200 full steps produce one motor revolution before microstepping is applied. The integrated reducer has a 1/10 gear ratio, which increases output torque while reducing the speed transmitted to the load. The enclosure has an ingress protection rating of IP43, providing limited protection against solid objects larger than 1 mm and against spraying water. Installation in an additional enclosure is appropriate where the motor may encounter excessive dust or direct liquid splash.
The complete assembly weighs 4.150 kg, so the mounting surface must support its static mass and the forces generated during rapid indexing. Its winding code B indicates the coil resistance and inductance pairing used with compatible StepSyn drivers. Positioning is based on open-loop pulse counting, allowing the controller to track commanded movement without encoder feedback in applications where the load remains within the available torque range. The geared output is suitable for applications that need increased torque at lower rotational speeds. Proper acceleration settings help prevent missed steps when the unit starts, stops, or reverses under load. The mounting structure should also remain rigid enough to preserve alignment between the reducer output and the connected mechanism.
