XR2AA05020FXSS5 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki XR2AA05020FXSS5 is a servo motor from the R SANMOTION Servo Motors series with a rated output of 200 W and a maximum speed of 6000 min-1. It features a 54 mm flange size, a wire-saving incremental encoder, and uses a permanent magnet excitation method. This motor has a protection grade of IP67 and operates at AC200V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XR2AA05020FXSS5 is a servo motor manufactured by Sanyo Denki within the R SANMOTION Servo Motors series. The unit uses a permanent-magnet rotor and electronic commutation from a compatible drive to convert electrical current into precise torque for industrial automation. Designed for compact machine tools, pick-and-place arms, and indexing fixtures, it supplies closed-loop motion when paired with a matching amplifier and encoder feedback. Its compact frame and continuous-duty design make it suitable for equipment where installation space and operating availability are important.
Its continuous power output is 200 W, allowing moderate inertial loads to be accelerated without oversizing the drive. The permissible bus connection of 200 VAC aligns with common low-voltage servo amplifiers found in compact control cabinets. Shaft speed peaks at 6000 rpm, supporting short cycle times on assembly stations. The housing has an IP67 protection rating, which prevents dust ingress and protects the motor during temporary immersion under the applicable test conditions. A square mounting interface of 54 mm matches common gearhead and bracket patterns. Position and commutation data are generated by a wire-saving incremental encoder that reduces the number of conductors required for feedback, helping limit connector count and simplify cable routing.
The electrical insulation withstands 1500 VAC for one minute, providing dielectric strength suitable for use with pulse-width-modulated servo drives. Insulation resistance exceeds 10 MΩ at 500 VDC, indicating minimal leakage through the motor’s insulating materials. The motor can operate at an ambient relative humidity of 20% to 90% RH when condensation is prevented inside the stator. Permitted storage temperatures range from -20 °C to +65 °C, helping preserve the motor’s insulation system and permanent magnets while the unit is not operating. The motor has a continuous time rating for sustained operation under its rated load conditions. Its V15 vibration classification supports operation in machinery exposed to vibration from repetitive starts, stops, and indexing movements. Permanent-magnet excitation provides the rotor field needed for responsive torque production and accurate closed-loop position control.
