R2AA08075FX02NM
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The R2AA08075FX02NM servo motor boasts a rated power of 750W, a flange size of 80 mm square, a nominal voltage of AC200V, and a rated speed of approximately 3000 min⁻¹. Part of the R SANMOTION Servo Motors series by Sanyo Denki, it features natural cooling and operates reliably between 0 to 40 °C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The R2AA08075FX02NM is a highly praised servomotor created, produced, and tested by Sanyo Denki for precise servo applications and systems. Released under the R2 product umbrella, this servo motor is known for its high compatibility and precision. Equipped with an accurate servo encoder, this motor can send digital signals to a servo drive for precise monitoring of the shaft parameters, such as speed, torque, and velocity. The R2AA08075FX02NM’s encoder has an inertia of 0.0042 x 10^-4 kg(m^2), while the R2AA08075FX02NM itself has an inertia of 1.82 x 10^-4 kg(m^2). Compared to other servomotors under the R2 product line, the R2AA08075FX02NM has a relatively low inertia, allowing it to achieve final speed faster.
To excite the motor, an input supply with a terminal voltage of 200 VAC must be used. At this nominal excitation, the servomotor can achieve its nameplate characteristics after the starting transient has stabilized. For this servomotor, the rated speed is 3000 rpm. At this shaft velocity, the R2AA08075FX02NM can deliver a power output of 0.75 kW and draw an armature current of 4.6 A. For a brief period of time during stall conditions, the R2AA08075FX02NM can draw an instantaneous current of 15.5 A. For this reason, it is advisable to use a servo amplifier with a capacity of at least 30 A.
The R2AA08075FX02NM has a flange size of 80 mm sq. and features an impressive chassis with a protection code of IP 65. With this protection category, the motor is essentially protected from moisture and from small dust particles. The R2AA08075FX02NM has a weight of 2.8 kilograms and supports various flange mounting orientations, such as vertical (facing up), vertical (facing down), and horizontal.
Frequently Asked Questions about R2AA08075FX02NM:
Q: What is the maximum rotational speed of the R2AA08075FX02NM?
A: The R2AA08075FX02NM can achieve a maximum rotational speed of 6000 rpm.
Q: What type of servo drives work best with the R2AA08075FX02NM?
A: Sanyo Denki’s RS3A03XX servo drives are compatible with the R2AA08075FX02NM because they have a capacity of 30 A.
Q: Does the R2AA08075FX02NM come with a holding brake?
A: No, the R2AA08075FX02NM does not come with a blocking brake.
Q: What is the rated power rate of the R2AA08075FX02NM?
A: The R2AA08075FX02NM has a rated power rate of 31 kW/s.
Q: What should be the operating ambient conditions for the R2AA08075FX02NM?
A: During operation of the R2AA08075FX02NM, the relative humidity must be non-condensing and below 90%, while the temperature must not exceed 40 degrees Celsius.
