Product Description:

The R2AA08075FCSCKM6 is a medium-inertia AC servo motor produced by Sanyo Denki for the R SANMOTION Servo Motors series. Designed as a compact unit with an 80 mm flange, it works with compatible servo drives to provide closed-loop torque and position control in automated pick-and-place stations, packaging machinery, and general motion axes. Within these systems, the motor converts electrical energy into precisely regulated mechanical rotation, enabling repeatable positioning and smooth velocity profiles for industrial automation tasks.

At its continuous operating point, the motor delivers a rated mechanical output of 750 W while turning at a nominal speed of 3000 rpm. This speed and power correspond to a rated torque of 2.39 N·m, providing steady rotational force for process loads. The electromagnetic system draws an armature current of 4.6 A RMS from a 200 V supply. A compatible drive must support this voltage and provide sufficient current capacity for continuous operation without thermal overload.

For rapid indexing, the shaft can accelerate to a maximum speed of 6000 rpm, allowing short bursts of motion above the nominal operating speed. During transient loads, the magnetic circuit provides a peak stall torque of 8.5 N·m, giving the motor additional force to overcome static friction or momentary overloads. The integral holding brake operates from 24 VDC and clamps the rotor when motor power is removed, while its coil typically draws 0.37 A. Dynamic response is influenced by a rotor inertia of 1.82 × 10⁻⁴ kg·m², which balances responsive acceleration with stable tracking of command profiles. CE and UL certifications support installation in regions that observe those safety standards. A wire-saving incremental encoder reduces the number of required conductors while supplying high-resolution position feedback to the servo drive.