R2AA08075FCPF6 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki R2AA08075FCPF6 is part of the R SANMOTION Servo Motors series and features a middle inertia design. It is equipped with a battery backup absolute encoder, has a flange size of 80 mm, and a rated output of 750 W. This motor includes a 24 VDC holding brake, supports a max rotation speed of 6000 min-1, and operates at a supply voltage of 200 Volts.
Internal Product Review
The R2AA08075FCPF6 is a Sanyo Denki SANMOTION R servo motor with middle inertia and a 750 W rated output. A battery backup absolute encoder and 24 VDC holding brake support accurate positioning and secure axis control during stops. Strong dynamic capability stands out with a maximum rotation speed of 6000 min-1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The R2AA08075FCPF6 is a servo motor manufactured by Sanyo Denki for controlled motion applications. Acting as a rotary actuator, it converts electrical energy from a compatible servo drive into controlled mechanical torque for positioning tasks in pick-and-place modules, indexing tables, packaging equipment, and other automated machinery. Closed-loop control allows the connected drive to regulate shaft position, speed, and torque as operating loads change. The motor is intended for axes that require accurate movement, rapid response, and secure load retention when machine power is removed.
The stator windings are designed for a nominal bus voltage of 200 V, allowing the motor to operate with compatible AC servo drives. The motor has a rated output of 750 W, providing shaft power for moderate payloads in packaging and assembly cells. An 80 mm square flange provides a compact mounting surface for attachment to a machine plate or suitable gearbox. The motor reaches a peak speed of 6000 rpm, supporting rapid indexing and short positioning cycles. Position feedback is provided by a battery-backed absolute encoder that retains multi-turn position information when the main power supply is disconnected. The stored position data allow the drive to resume coordinated operation without requiring the axis to complete a new homing cycle after every shutdown.
The middle-inertia rotor balances responsive acceleration with additional stability for belt-driven mechanisms and loads that may otherwise produce oscillation. An integrated holding brake uses 24 VDC control power and provides static holding torque for vertical or gravity-loaded axes during shutdowns and emergency stops. The brake is intended to retain a stationary load rather than perform repeated dynamic stopping. Within the SanMOTION R Series, compatible torque, speed, and thermal models allow the motor to operate with the appropriate drive parameters for its frame and winding. The motor uses vacuum-impregnated windings and sealed bearings to protect internal components and support consistent thermal performance. Vacuum impregnation helps stabilize the winding assembly, while the sealed bearings limit the entry of dust and other contaminants during normal industrial operation.
