R2AA08075FCH00W Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki R2AA08075FCH00W is a middle inertia servo motor from the R SANMOTION Servo Motors series with a rated output of 750 watts and an 80mm flange size. It operates at a maximum rotation speed of 6000 min-1 and features an absolute encoder for incremental systems. This model includes a 24 VDC holding brake and is designed for a 200 volt supply voltage.
Internal Product Review
The R2AA08075FCH00W is a Sanyo Denki SANMOTION R series servo motor with 750 W rated output and 200 V supply. The middle-inertia design and absolute encoder for incremental system support stable tuning and accurate feedback in demanding motion applications. A 24 VDC holding brake and 6000 min-1 maximum rotation speed make this unit an excellent choice for dynamic axis control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The R2AA08075FCH00W is a servo motor produced by Sanyo Denki within the R SANMOTION Servo Motors series. It converts electrical energy from a compatible drive into controlled torque for positioning or rotating mechanical loads in industrial automation equipment. The device interfaces directly with SANMOTION controllers to execute precise speed and position commands from a PLC or motion processor. This functionality supports motion in pick-and-place stations, small machining centers, packaging lines, and other automated systems that require accurate shaft control.
The motor operates at 200 V, which is the phase-to-phase voltage that the drive must deliver under nominal load. At the shaft, the device provides 750 W of continuous mechanical output, making it suitable for mid-capacity axes that require consistent torque over extended operating cycles. Its magnetic design permits a maximum rotational speed of 6000 rpm, enabling rapid indexing and high surface speeds. Mechanical attachment is handled through an 80 mm square flange, allowing the housing to bolt directly to compatible gearboxes or machine plates. Position data is delivered by an absolute encoder that stores multi-turn position information while providing the feedback needed for servo-loop updates. This arrangement allows position information to remain available after the system is powered down. A built-in 24 VDC holding brake locks the rotor when control power is removed, helping maintain the position of suspended or stationary loads.
Dynamic behavior is supported by a medium-inertia rotor, which limits resonance while allowing quick acceleration of moderate loads. The motor is supplied in a standard configuration, so its electrical and thermal features follow the baseline design without special coatings or cooling jackets. Compatibility with SanMOTION R Series amplifiers provides coordinated connector pinouts and parameter sets across a multi-axis installation. The matched controller processes encoder feedback and adjusts motor current to maintain the commanded speed, torque, or position during changing load conditions.
