R2AA06040HCSSUM8 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki R2AA06040HCSSUM8 is a middle inertia servo motor in the R SANMOTION Servo Motors series. It features a 400 watt rated output, a 60 mm flange size, and operates at 200 volts. This model includes a wire-saving incremental encoder and a 24 VDC holding brake, and meets CE and UL standards.
Internal Product Review
The R2AA06040HCSSUM8 is a Sanyo Denki SANMOTION R series servo motor rated at 400 W. The wire-saving incremental encoder supports clean feedback integration, and the 24 VDC holding brake adds dependable axis control in motion applications. CE and UL compliance further strengthens suitability for 200 V servo systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The R2AA06040HCSSUM8 servo motor is built by Sanyo Denki and belongs to the R SANMOTION Servo Motors series. It is a rotary actuator designed for closed-loop position and velocity control in automated production lines, conveying equipment, and compact assembly stations. When connected to a matched amplifier, the unit converts drive commands into precise shaft motion for moving tooling or products within industrial automation cells. The closed-loop arrangement allows the amplifier to correct position and speed deviations as operating loads change.
The motor is rated for 400 W of continuous mechanical output, making it suitable for mid-range axes that accelerate moderate inertial loads without requiring an oversized frame. Its stator windings support a 200 V class supply, allowing connection to compatible servo drives operating from 200-volt mains. A square 60 mm flange provides a consistent mounting reference for compatible planetary gearheads and ball-screw brackets. Rotor feedback is provided by a wire-saving incremental encoder, which reduces the required harness pin count by multiplexing channels while supplying high-resolution position data to the control loop. The motor’s medium-inertia design balances torque production and speed changes, helping reduce oscillation during pick-and-place operation. This balance also supports stable response when the connected mechanism presents moderate load inertia.
For load holding, the unit includes a holding brake. Its electromagnetic clamp engages automatically when drive power is removed and releases when supplied with 24 VDC. This arrangement helps prevent an attached load from moving while the axis is unpowered. The motor carries the CE mark and UL certification, indicating compliance with applicable safety requirements in Europe and North America. Its connector arrangement, frame dimensions, and control characteristics support installation in multi-axis systems that use related models from the same product platform.
