R2AA06040HCPBLM8
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships in 3 Days
The R2AA06040HCPBLM8 servo motor delivers a rated output power of 0.4 kW, a rated speed of 3000 min⁻¹, a rated torque of 1.27 N·m, and a peak torque at stall of 4.8 N·m. Part of the R SANMOTION Servo Motors series manufactured by Sanyo Denki, it weighs 0.6 kg and operates within a temperature range of 0 to 40°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The R2AA06040HCPBLM8 is an R2 series AC motor. Its manufacturer is Sanyo Denki, a Japanese corporation specializing in industrial control solutions. Voltage class of the motor is 200 Volts. Power output of the motor is 400 Watts. The nominal operating speed is 3000 RPM. When required, the motor can operate at a peak speed of 3500 RPM. An onboard battery provides backup power for the absolute encoder that has 16 bit resolution. Dimensions of the flange on the R2AA06040HCPBLM8 motor are 60 millimeters. Time rating of the motor is continuous. The dielectric can withstand 1500 Volts AC for 1 minute. At 500 Volts DC, the motor insulation delivers resistance greater than 10 megaohms. A fully enclosed motor housing provides IP67-level protection. This rating implies full dust protection and enhanced water protection.
With this level of protection, operators can safely install and operate the motor in adverse operating conditions. The motor is without an oil seal. However, the seal is available as an option for operators and applications that require it. For rated performance, Sanyo highly recommends using the motor in areas where the temperature is maintained between 0 and 40 degrees Celsius. The storage temperature for unused Sanmotion R motors is -20 to 65 degrees Celsius. For humidity, the ambient recommended range is from 20 to 90%. R2AA06040HCPBLM8 is a permanent magnet motor that must be used with a Sanyo servo drive. The motor is designed for installation in the horizontal orientation. This is recommended so that the motor can withstand vibrations. The motor axis can withstand peak torque at stall. Color of the motor is black and a type plate is attached to aid motor identification.
Frequently Asked Questions about R2AA06040HCPBLM8:
Q: Does the motor feature a holding brake?
A: A 24 Volts DC holding brake is installed on the motor.
Q: Which type of encoder is installed on the motor?
A: An absolute encoder with battery backup is installed on the motor.
Q: What is the motor flange size?
A: The motor flange size is 60 millimeters.
Q: What is the encoder resolution?
A: The encoder resolution is 16 bits.
Q: What is the maximum motor speed?
A: The peak motor speed is 3500 RPM.
