R2AA06040FXP11M Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki R2AA06040FXP11M is a middle inertia servo motor from the R SANMOTION Servo Motors series with a 60 mm flange size. It features a battery backup absolute encoder, a rated output of 400 W, and a maximum rotation speed of 6000 min-1. This motor operates at a supply voltage of 200 Volts and meets CE and UL identification standards.
Internal Product Review
The R2AA06040FXP11M is a Sanyo Denki SANMOTION R servo motor with 400 W rated output and 200 Volt supply. A battery backup absolute encoder supports dependable position retention, while 6000 min-1 maximum rotation speed suits responsive servo applications. CE and UL identification adds confidence for machine integration, making the motor a well-balanced choice for motion systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The R2AA06040FXP11M is an AC servo motor produced by Sanyo Denki. As a rotary actuator for industrial automation, it couples with matching amplifiers to deliver closed-loop position, speed, and torque control for pick-and-place arms, packaging machines, and semiconductor tools. Its compact frame aligns with small gearboxes and accommodates dense multi-axis layouts. The motor also supports the thermal cycling and demanding operating cycles typical of high-throughput equipment.
The motor supplies a continuous mechanical output of 400 W, so the selected drive must provide enough current to sustain that power without derating. Its input section is designed for a nominal bus voltage of 200 V, simplifying cabinet wiring in machines that already use 200 V class inverters. Peak shaft speed reaches 6000 rpm, enabling fine indexing at high linear rates when the motor is paired with a low-ratio reducer. A square 60 mm flange conforms to IEC mounting interfaces, reducing the need for custom adapter plates. Feedback is supplied by a battery-backed absolute encoder, which retains multi-turn position data during a power loss and eliminates the need for homing moves after emergency stops.
The motor carries CE and UL certifications, supporting installation in European and North American markets. The rotor and stator combination has medium inertia, balancing quick acceleration with stable load matching for moderate-mass tooling or indexing tables. Because the motor has no holding brake, drive torque or an external clamp must maintain the load position when mains power is removed. This should be considered when the motor controls a vertical axis or another load that can move at standstill. As part of the SanMOTION R Series, the motor uses connector orientations and thermal ratings shared with other models in the lineup. These common interfaces support consistent cable routing and cooling arrangements across machines that use multiple axis sizes.
