R2AA06040FX02NM Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki R2AA06040FX02NM is a middle inertia servo motor from the R SANMOTION Servo Motors series. It has a flange size of 60mm, a rated output of 400 W, and operates at a supply voltage of 200 Volts. The motor supports a maximum rotation speed of 6000 min-1 and complies with CE and UL identification standards.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The R2AA06040FX02NM servo motor is manufactured by Sanyo Denki and supplied within the SANMOTION R Servo Motors series. It is an electromechanical actuator intended for industrial automation axes that require accurate velocity and position control through closed-loop feedback. When integrated with a compatible drive amplifier, the unit translates current commands into proportional torque for controlled rotary motion. This operating principle makes the motor suitable for pick-and-place stations, conveyor diverters, small machining fixtures, and other equipment that performs repetitive movements.
The square mounting flange measures 60 mm across, allowing the motor to connect directly to compact gearheads and linear stages without adapter plates. Rated for a 200 V three-phase AC supply, it is compatible with standard low-voltage servo drives commonly installed in multi-axis controller racks. The motor provides a continuous mechanical output of 400 W under nominal thermal conditions, supporting moderate loads while maintaining accurate speed regulation. At a maximum rotational speed of 6000 rpm, the rotor can perform rapid indexing movements and reduce dwell time in equipment with frequent start-and-stop cycles. Proper drive selection and operating conditions are necessary to maintain the stated continuous output while avoiding excessive winding temperatures.
This model has a medium-inertia design, providing a balance between acceleration response and stability when coupled to reflected load inertia. It is supplied without a holding brake, so required static holding force must come from an external mechanical lock or the drive’s torque-producing capability. Vertical or gravity-loaded axes may require a separate holding device to prevent movement when drive power is removed. The motor has CE and UL conformity, supporting installation in regions where the corresponding safety and electromagnetic compatibility requirements apply. Its mounting dimensions and operating characteristics make it appropriate for compact automation systems in which controlled acceleration, stable positioning, and repeatable high-speed movement are required.
