R2AA06040FCS01M8
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The R2AA06040FCS01M8 from Sanyo Denki's R SANMOTION Servo Motors series delivers a rated output of 400 Watts with a rated speed of 3000 rpm. It has a continuous stall torque of 1.37 Nm, a peak stall torque of 4.4 Nm, and a mass including the encoder of 1.4 kg. The rated armature current is 2.8 Arms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
R2AA06040FCS01M8 is a Sanyo Denki servo motor. The motor is designed for closed loop control applications. It supports feedback via an integrated encoder. The motor has a black colored housing with IP67 protection rating. This is an extremely high class protection rating and indicates full protection against dust ingress and strong protection against high-pressure water ingress. Speed rating of the motor is 3000 RPM and the maximum speed is 6000 RPM. The motor requires 200 Volts AC input and delivers 400 Watts output. The rated output current is 2.8 Amps and the output torque is 1.02 Nm. The voltage constant of the motor is 18.3 millivolts per RPM. The encoder is a wire-saving incremental encoder. The motor is CE marked and UL approved.
A 60 millimeter flange on the motor housing provides a means for secure installation. A holding brake rated for 24 Volts DC provides safety for equipment and operators during operation. The motor must be installed only on a non-flammable surface. The must be operated within specified ambient conditions, which include 0 to 40 degrees Celsius ambient temperature and up to 90% relative humidity. The motor must be protected from drops and excessive shocks. Operators must ensure that the correct motor is delivered. They can do this by inspecting the type plate attached to the housing. Sanyo has designed the motor for indoor use. Mounting is supported in several orientations, including horizontal and vertical with the shaft on the bottom or the top. A cable trap should be used when the motor is installed vertically to prevent oily water from entering the motor. Only qualified personnel should work on the servo motor.
Frequently Asked Questions about R2AA06040FCS01M8:
Q: What is the wiring connection?
A: The wiring is three-phase wye connection.
Q: What is the motor protection rating?
A: The motor protection rating is IP67.
Q: What is the insulation class?
A: The insulation class is F.
Q: What is the output current?
A: The output current is 2.8 Amps.
Q: How can you mount the motor?
A: The motor has a flange for mounting.
