R2AA06040FCH00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki R2AA06040FCH00 is a middle inertia servo motor from the R SANMOTION Servo Motors series. It features a rated output of 400 watts, a flange size of 60 mm, and operates with a supply voltage of 200 volts. The motor is equipped with a 17-bit absolute encoder and has a protection code of IP67.
Internal Product Review
The R2AA06040FCH00 is a SANMOTION R series servo motor with 400 W rated output and 200 V supply. A 1.15 N·m rated torque and 6000 min⁻1 maximum rotation speed give this unit strong dynamic capability for precise axis control. IP67 protection and a 17-bit absolute encoder make this servo motor an excellent fit for accurate motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The R2AA06040FCH00 is a servo motor produced by Sanyo Denki for the R SANMOTION Servo Motors series. As a medium-inertia rotary actuator, it is intended to drive positioning tables, pick-and-place heads, and similar motion axes in automated equipment where moderate load inertia must be matched with quick response. An integrated 24 VDC holding brake locks the shaft whenever power is removed, allowing the motor to secure a vertical axis while the drive is not supplying torque.
The stator windings are energized from a single-phase supply of 200 V, and the electromagnetic design delivers a continuous mechanical output of 400 W. Under rated conditions, the shaft provides 1.15 N·m of torque while remaining within the temperature limits of the standard insulation system. When the load increases during acceleration, the magnetic circuit can reach a peak stall torque of 4.8 N·m without demagnetization. Dynamic behavior is influenced by the rotor’s moment of inertia, measured at 0.4153 × 10⁻⁴ kg·m². This level of inertia balances torque stability with acceleration, helping the shaft follow speed commands accurately in applications with rapidly changing motion profiles.
The motor has a square flange measuring 60 mm across, enabling direct attachment to compact gearheads or machine plates. Its maximum operating speed reaches 6000 rpm, providing the velocity required for fast indexing cycles before centrifugal losses become significant. Position feedback is supplied by an absolute encoder with a resolution of 131,072 counts (17-bit), supporting fine position interpolation in compatible digital drives. The enclosure has an IP67 protection rating, preventing dust ingress and protecting the motor against temporary water immersion when the rear connector is correctly gasketed. The compact flange allows the motor to fit into confined machine layouts, while the medium-inertia rotor supports stable control of loads that require a balance between responsiveness and smooth acceleration.
