Q4AA2222KHXFJ5
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Q4AA2222KHXFJ5 servo motor achieves a rated output of approximately 0.1–0.3 kW, depending on the configuration. Manufactured by Sanyo Denki, this motor is part of the Q SANMOTION Servo Motors series and delivers a rated speed of 3000 min⁻¹. It features a peak torque of 1.06 N·m.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q4AA2222KHXFJ5 is one of the most prominent servo motors manufactured by Sanyo Denki under the Sanmotion Q series. It belongs to the Q4 series, boasting high power and low inertia. Specifically, the Q4AA2222KHXFJ5 is a large servo motor with a flange size of 220 millimeters, or around 8.66 inches. As one of the largest motors manufactured by Sanyo Denki under the Q4 family, this motor requires high-capacity servo drives. During operation, the Q4AA2222KHXFJ5 can deliver a rated power output of 22 kW continuously. Because of its large power output, it can be used directly for critical applications requiring high torque and mechanical power.
The Q4AA2222KHXFJ5 does not come with a holding brake or protection system. As with most servo motors, only the encoder is built-in. Components such as the protection devices are usually integrated in the servo drive that controls the motor. Although the Q4AA2222KHXFJ5’s nameplate states a nominal input voltage of 200 VAC, it is never recommended to connect this motor directly to the mains supply. Instead, the power cables of this motor must be connected to the proper terminals of the servo drive. The servo drive serves both as a control unit and a power supply unit for servo motors. For this reason, it is important to choose a compatible servo drive that can match the capacity of the Q4AA2222KHXFJ5.
The Q4AA2222KHXFJ5 can achieve a maximum rotation speed of 3000 to 3500 rpm. At rated conditions, however, the shaft speed is around 2500 rpm. During operation, the maximum rotation speed for the Q4AA2222KHXFJ5 can only be achieved when the torque is set at the rated value. For most servo motors, the maximum torque and speed cannot be achieved at the same time.
Frequently Asked Questions about Q4AA2222KHXFJ5:
Q: What is the nominal input voltage for the Q4AA2222KHXFJ5?
A: As a Q4AA motor, the Q4AA2222KHXFJ5 requires a nominal AC input of 200 VAC.
Q: What type of configuration does the Q4AA2222KHXFJ5 support?
A: The Q4AA2222KHXFJ5 supports three-phase systems, preferably in wye connection.
Q: What is the protection rating for the Q4AA2222KHXFJ5?
A: As part of the Sanmotion Q series, the Q4AA2222KHXFJ5’s chassis has a protection category of IP67.
Q: What is the recommended environmental temperature for the Q4AA2222KHXFJ5 during operation?
A: During operation, the environmental or ambient temperature must not exceed 40 degrees Celsius.
Q: Where should the Q4AA2222KHXFJ5’s encoder be connected?
A: The Q4AA2222KHXFJ5’s encoder should be connected to the amplifier’s input peripheral port, usually CN2 for Sanmotion Q amplifiers.
