Q3AA18350HBZTA Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki Q3AA18350HBZTA is part of the Q SANMOTION Servo Motors series and features a 180 mm flange size with a 90V holding brake. This servo motor offers a rated output of 3.5 kW, supports a supply voltage of 200V, and operates in temperatures from 0 to 40°C. Its maximum rotation speed ranges from 3000 to 3500 min-1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q3AA18350HBZTA is an AC servo motor manufactured by Sanyo Denki as part of the Q SANMOTION Servo Motors series. The unit belongs to the manufacturer’s Q Series frame and is intended to drive industrial axes that require accurate position, speed, or torque regulation. When paired with a compatible amplifier, the motor translates commanded current into shaft rotation, allowing automated machines, pick-and-place gantries, and material-handling carriages to reach target positions quickly and repeatedly. Closed-loop operation enables the amplifier to correct motion in response to changing loads while maintaining stable axis control.
Its stator windings are designed for a supply of 200 V, a common bus level that helps standardize drive cabinet components across multi-axis cells. Under rated conditions, the motor delivers 3.5 kW of mechanical output, providing sufficient power for medium-inertia loads such as indexing turntables or packaging augers. Its mechanical speed is specified at 3000 to 3500 rpm, providing a broad operating range for machinery that requires rapid positioning or continuous rotation. Mounting follows an IEC square flange footprint measuring 180 mm, so the housing aligns with reducers or gearheads that share the appropriate mounting pattern. The holding mechanism uses a 90 V brake supply to clamp the shaft when the drive is disabled, preventing vertical loads from drifting during a power loss. This brake can also hold the connected axis stationary between operating cycles without relying on continuous motor torque.
The motor operates in ambient temperatures from 0 to 40 °C without forced cooling, matching the thermal conditions found on many production floors. It tolerates up to 90% relative humidity, permitting installation in humid production areas when condensation is prevented. Its Q Series design supports use with compatible feedback components, amplifiers, and cables from the same product platform. Proper amplifier matching allows the motor to maintain regulated torque and speed while protecting the windings from excessive current. The square flange and integrated holding brake also support installation on vertical axes, indexing equipment, packaging machinery, and automated material-handling systems.
