Q2AC13058HXS6P Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki Q2AC13058HXS6P is a medium-inertia servo motor from the Q SANMOTION Servo Motors series. It has a 130 mm flange size and operates without a holding brake. This model allows a maximum rotation speed between 3000 and 3500 min-1 and uses a reduced wiring incremental encoder for sensor technology.
Internal Product Review
The Q2AC13058HXS6P is a Sanyo Denki Q SANMOTION servo motor with a medium-inertia design and reduced-wiring incremental encoder feedback. An operating range of 0 to 40°C and permissible relative humidity up to 90% support dependable use in controlled industrial environments. The 3000 to 3500 min-1 maximum rotation speed makes this motor a strong choice for precise servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q2AC13058HXS6P is an AC servo motor supplied by Sanyo Denki within the Q SANMOTION Servo Motors series. Designed for closed-loop motion axes in packaging machines, pick-and-place arms, and general-purpose positioning stages, the unit converts drive current into controlled shaft torque and velocity. Its frame geometry aligns with the Q Series modular hardware, allowing direct coupling to planetary gearboxes or belt transmissions used in industrial automation. This arrangement supports installations that transfer rotary motion through either compact geared assemblies or flexible belt-driven mechanisms.
The motor mounts on a square flange that measures 130 mm across, so it fits the same bolt pattern as larger IEC motors while keeping depth moderate. Its rotor and stator combination has a medium-inertia design, offering a compromise between rapid acceleration and the load-matching stability required by conveyors or indexing tables. The rated mechanical speed spans 3000 to 3500 rpm, providing a broad operating range while remaining within applicable vibration and bearing limits. For applications that require power-off holding, an external brake must be installed because the shaft is supplied without a holding brake. Position feedback is provided by a reduced-wiring incremental encoder, which reduces the connector pin count and simplifies installation while still returning fine-resolution incremental pulses to the drive. The feedback signals allow the connected servo drive to monitor rotor movement and correct positional or velocity errors during operation.
Three encoder variants, PP031, PP038, and PP062, are available, allowing selection of a resolution that matches the servo loop bandwidth without changing the motor’s mechanical dimensions. Continuous operation is permitted at ambient temperatures from 0 to 40 °C, so cabinet airflow or external cooling may be needed if the motor is installed near heat sources. When sealed connectors are used, the motor can operate at up to 90% relative humidity, provided condensation is prevented. Proper cable routing helps protect encoder communication from interference generated by nearby power conductors. The motor should be mounted with adequate clearance for its cables, coupling, and surrounding equipment. Loads connected to the shaft should remain aligned to limit unnecessary bearing stress during repeated positioning cycles.
