Q2AA10150VCP4A Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki Q2AA10150VCP4A is a medium-inertia servo motor from the Q SANMOTION Servo Motors series with a 100 mm flange size. It features a rated output of 1.5 kW and a 24V holding brake, and operates at a maximum rotation speed of 2000 min-1. The motor supports a 200V supply voltage, uses a reduced wiring absolute sensor, and has an operating temperature range of 0 to 40°C.
Internal Product Review
The Q2AA10150VCP4A is a Sanyo Denki Q SANMOTION servo motor with medium-inertia construction and a 1.5 kW rated output. A reduced-wiring absolute sensor and 2000 min-1 maximum rotation speed support accurate feedback and stable motion control in demanding servo applications. The 200 V motor platform and 24 V brake make the unit a strong choice for dependable positioning performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q2AA10150VCP4A is a servo motor produced by Sanyo Denki for the Q SANMOTION Servo Motors series. It is intended for positioning and speed-regulated axes in industrial automation, where closed-loop control requires accurate torque delivery and dependable rotor feedback. When connected to a matching drive controller, the motor converts regulated electrical power into controlled mechanical rotation for conveyors, indexing tables, and process equipment. The closed-loop arrangement allows the drive to adjust motor operation as the commanded speed, position, or load changes.
The motor delivers a rated output of 1.5 kW, providing a continuous mechanical power reference for selecting gear stages and load couplings. Its stator winding is designed for 200 V operation with a compatible servo drive. Mounting uses an IEC square pattern with a 100 mm flange, allowing the motor to fit machine interfaces that use the corresponding mounting dimensions. At maximum command, the rotor reaches 2000 rpm, providing the available upper speed for motion profiles and gear-ratio calculations. The unit incorporates a 24 V brake that clamps the shaft when de-energized, helping secure vertical or overhung loads during a loss of power. This holding function reduces the need for a separate mechanical device on axes that must remain stationary when drive power is unavailable.
A medium-inertia rotor balances responsive acceleration with load stability, which is useful for axes that undergo frequent starts and stops. The motor supports continuous operation at ambient temperatures from 0 to 40 °C, covering typical indoor production conditions without temperature-related derating. Its frame tolerates up to 90% relative humidity, making it suitable for humid areas when the surrounding installation provides appropriate protection against direct water exposure. Rotor position feedback is supplied by the PA035C sensor, a reduced-wiring absolute sensor that transmits multi-turn position data with fewer conductors. This feedback arrangement simplifies cable routing and reduces the number of connections required in applications with moving cables.
