Product Description:

The Q2AA08100HXS48 is a servo motor manufactured by Sanyo Denki for the Q SANMOTION Servo Motors series. This AC model sits in the Q Series sub-family and is intended for medium-capacity industrial axes that demand stable velocity and repeatable positioning. By pairing with a matching SANMOTION drive, the unit supplies closed-loop torque to conveyor stations, pick-and-place heads, and light machining spindles across automated production lines. An internal encoder feeds real-time shaft information to the controller, allowing high-gain speed and position regulation without additional sensors.

Mechanical dimensions start with a flange diameter of 86 mm, a size that lets the housing bolt directly to standard IEC motor plates while supporting compact gearboxes. The rotor is classified as medium-inertia, so acceleration profiles remain smooth when coupled to loads that would cause oscillation with low-inertia designs. Continuous mechanical power is delivered through a rated output of 1 kW when the stator windings are energized from a 200 V drive bus. Under this supply the motor can reach a maximum rotational envelope of 3000 to 3500 min⁻¹, giving users a workable speed range for both constant-torque and constant-power regions without exceeding the safety margin of the bearings and winding insulation.

This version ships without a brake, so holding torque must be provided by the drive or external mechanics when power is removed. Sensors adopted for this frame include the PP031, PP038, and PP062 variants, all read by a reduced wiring incremental encoder that simplifies cable runs and lowers installation time. Ambient service limits span 0 to 40 °C with a permissible relative humidity of 90%, allowing cabinet-mounted or open-machine installation in most climate-controlled facilities. Together these environmental and feedback features complete a package suited for repetitive duty cycles where consistent performance and straightforward integration are critical.