Q2AA08100HXS2T Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki Q2AA08100HXS2T is a medium-inertia servo motor with a rated output of 1 kW and a supply voltage of 200V. Part of the Q SANMOTION Servo Motors series, it features a flange size of 86 mm and operates at maximum speeds between 3000 and 3500 min-1. This motor is equipped with reduced wiring incremental encoder technology and is designed to operate in temperatures from 0 to 40 degrees Celsius with up to 90% relative humidity.
Internal Product Review
The Q2AA08100HXS2T is a Sanyo Denki Q SANMOTION servo motor with 1 kW rated output and medium-inertia construction. Reduced-wiring incremental encoder feedback supports clean integration, and the 200 V motor design fits common industrial servo platforms well. Stable operation up to 3000 to 3500 min-1 makes this unit a strong choice for responsive motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q2AA08100HXS2T is a servo motor manufactured by Sanyo Denki as part of the Q SANMOTION Servo Motors series. Intended for closed-loop motion systems, the unit works with a matching drive to provide precise torque and position control. Its controlled rotary output supports repeatable movement on packaging lines, pick-and-place units, indexing stations, and other automated equipment. Feedback from the motor allows the connected drive to correct motion as operating loads change, helping the axis follow programmed position and speed commands.
The motor has a square frame with a mounting flange of 86 mm, allowing direct attachment to gearboxes or machinery designed around this frame size. Its rated output is 1 kW, providing moderate continuous power without requiring a larger frame. A winding optimized for a 200 V supply allows the servo to connect to compatible industrial power systems while keeping operating current manageable. During acceleration and peak demand, the rotor can reach speeds from 3000 to 3500 rpm, supporting rapid indexing cycles and short transfer movements. The medium-inertia rotor balances torque stability with acceleration response, making it suitable for applications in which the connected load inertia may vary. This balance also helps the drive regulate motion without sacrificing the steady rotational behavior needed during controlled production cycles.
The motor operates in ambient temperatures from 0 to 40 °C and tolerates up to 90% relative humidity without condensation. These operating limits support installation on general-purpose factory equipment without additional climate control under normal indoor conditions. The shaft is supplied without a holding brake, so an external clamping device is necessary when a load must remain stationary after motor torque is removed. Position feedback is provided by a reduced-wiring incremental encoder, which minimizes the required connections while maintaining high-resolution pulse output for closed-loop control. The encoder is available with PP031, PP038, or PP062 sensor builds to accommodate different compatible drive resolutions. This feedback arrangement allows the controller to monitor rotor movement and correct position or speed deviations during operation.
