Q2AA08100DXS28 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki Q2AA08100DXS28 is a medium-inertia servo motor from the Q SANMOTION Servo Motors series. It features an 86mm flange size, 1 kW rated output, and operates at a supply voltage of 200V. The motor uses a reduced wiring incremental encoder and supports maximum rotation speeds between 4500 and 5000 min-1.
Internal Product Review
The Q2AA08100DXS28 is a Sanyo Denki Q SANMOTION servo motor with a 1 kW rated output and medium-inertia construction. A maximum rotation speed of 4500 to 5000 min-1 and a reduced wiring incremental encoder support responsive motion control and clean feedback integration. Strong performance from a 200 V motor platform makes the unit a dependable choice for precise servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q2AA08100DXS28 servo motor is produced by Sanyo Denki and belongs to the Q SANMOTION Servo Motors series. As a rotary actuator for closed-loop motion systems, it converts electrical power into controlled shaft torque and speed, allowing positioning tables, pick-and-place heads, or packaging axes to follow precise command profiles in industrial automation cells. Its square frame mounts on a standard 86 mm flange, making it interchangeable with other IEC-compliant motors in the same frame class.
The laminated core is energized from a 200 V AC bus and can continuously deliver 1 kW of mechanical output at the shaft. To handle rapid production cycles, the rotor can spin from 4500 to 5000 rpm, a speed range that covers most midrange servo drive requirements. Because the rotor-magnet assembly has medium inertia, it stores more kinetic energy than low-inertia models, so velocity changes are smoother when driving belt conveyors or lead-screw stages. This inertia level also eases tuning by reducing overshoot when the axis reverses or stops. The motor can therefore support motion profiles that require steady acceleration and controlled deceleration under moderate mechanical loads.
Position feedback is provided by a reduced-wiring incremental encoder that minimizes connector count while maintaining differential line-driver outputs for noise immunity. Three selectable encoder variants, PP031, PP038, and PP062, allow a resolution to be selected according to controller bandwidth and allowable following error. Ambient operation is supported from 0 to 40 °C, and varnished windings allow continuous duty without forced cooling within this temperature range. The enclosure tolerates up to 90% relative humidity, so condensation control rather than absolute dryness is the primary concern in damp operating areas. The installation should prevent moisture from condensing on the motor surfaces or entering electrical connections during temperature changes. Since the motor is supplied without a holding brake, vertical or suspended loads must be secured by external clamping hardware or drive-controlled static torque during a power loss.
