Q2AA08100DXS0R Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki Q2AA08100DXS0R is a medium-inertia servo motor from the Q SANMOTION Servo Motors series with a rated output of 1 kW and an 86 mm flange size. This 200V motor operates without a holding brake, has a maximum rotation speed of up to 5000 min-1, and uses a reduced wiring incremental encoder sensor.
Internal Product Review
The Q2AA08100DXS0R is a Sanyo Denki Q SANMOTION servo motor with 1 kW rated output and a medium-inertia design. Reduced-wiring incremental encoder feedback and 200 V motor supply make integration especially efficient in modern motion systems. Maximum rotation speed up to 5000 min-1 makes the unit a strong choice for responsive servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q2AA08100DXS0R servo motor is produced by Sanyo Denki within the Q SANMOTION Servo Motors series. As an AC actuator, it converts regulated power from its matching drive into precise torque and speed for positioning tables, pick-and-place heads, and other coordinated machine axes in industrial automation. The motor is supplied without a holding brake, so vertical axes must rely on external clamps or motor torque to maintain position when power is removed.
The motor mounts to gearboxes or machine frames using an 86 mm square flange that matches common IEC mounting patterns, so installation does not require an adapter plate. Its continuous shaft output rating of 1 kW sets the thermal design point for the associated amplifier and mechanical system. A stator winding designed for the 200 V class receives power through the matching SANMOTION Q drive, which connects to the factory supply. During rapid indexing or traverse moves, the rotor can reach speeds from 4500 to 5000 rpm, supporting short settling times when the load inertia is properly tuned to the servo loop. The medium-inertia rotor supports responsive acceleration while helping keep torsional resonance within manageable control bandwidths.
Position information is delivered by a reduced-wiring incremental encoder, which lowers the required conductor count while supporting high-resolution edge evaluation in the drive. Three encoder variants, PP031, PP038, and PP062, are available to accommodate different accuracy and speed requirements. The motor can operate at ambient temperatures from 0 to 40 °C, and remaining within this range helps prevent excessive thermal stress on the windings and magnets. It also tolerates up to 90% relative humidity without condensation, allowing operation in controlled enclosures where moisture remains below the condensation threshold.
