Q2AA08100DXP5B Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki Q2AA08100DXP5B is a medium-inertia servo motor from the Q SANMOTION Servo Motors series with a flange size of 86mm and a rated output of 1kW. It operates at a supply voltage of 200V and supports a maximum rotation speed of 4500 to 5000 min-1. This model uses a reduced wiring absolute sensor and can function within an operating temperature range of 0 to 40°C with up to 90% relative humidity.
Internal Product Review
The Q2AA08100DXP5B is a Sanyo Denki Q SANMOTION servo motor with 1 kW rated output and a 200 V motor supply. A medium-inertia design and a reduced wiring absolute sensor support stable motion control and efficient system integration. Maximum rotation speed up to 5000 min-1 makes this unit a strong choice for responsive servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q2AA08100DXP5B servo motor is manufactured by Sanyo Denki and belongs to the Q SANMOTION Servo Motors series. This AC unit serves as a power element in industrial automation systems, delivering commanded torque and velocity to coordinate indexing tables, feeders, and pick-and-place heads. Integrated feedback from an absolute sensor enables tight closed-loop control, allowing motion controllers to synchronize the shaft with millisecond accuracy during repetitive production cycles. The motor is suitable for applications that require controlled acceleration, accurate positioning, and consistent speed regulation under changing loads.
The motor has a square flange that measures 86 mm across, making it compatible with standard IEC mounting patterns. Its continuous electrical rating reaches 1 kW, so it can drive loads such as small hydraulic pumps or high-speed spindles while remaining within its thermal limits. During transient moves, the rotor can spin from 4500 to 5000 rpm, a speed range that supports rapid acceleration while staying below critical vibration bands for this frame size. Power is supplied from a 200 V source through the matching amplifier, allowing operation with common three-phase industrial power systems. The magnetic design has medium inertia, providing a balance between load decoupling and responsiveness. This inertia level simplifies control-loop tuning when the driven mechanism has moderate mass or uses gear reduction.
The permitted operating range extends from 0 to 40 °C in ambient air and allows up to 90% relative humidity. The unit can operate inside control cabinets without dedicated climate conditioning as long as condensation is prevented and adequate ventilation is available. The shaft is held solely by drive torque because the motor is supplied without a holding brake. The lack of a brake reduces the motor’s overall length and moment of inertia, but an external holding mechanism may be required for suspended or vertical loads. Position data is generated by the integrated PA035C encoder. This encoder uses a reduced-wiring absolute sensor arrangement to combine power and signal conductors, reducing the connector count and simplifying cable routing within compact machinery.
