Product Description

The Sanyo Denki produced Q SANMOTION Servo Motors product listing from which the Q2AA08100DXP3M evolves, provides multi‑axis synchronous control. It achieves a rated output power of 1 kW and keeps less heavy‑duty drives from overheating. The component also spins at the rated speed of 3000 min⁻¹ in order to balance torque with the velocity in the repetitive processes. The torque developed is rated at 3.18 N·m with which the positioning accuracy remains steady under steady loads.

A continuous stall torque of 3.92 N·m sustains static loads which prevents unwanted drift during pauses. A peak torque value of 12.5 N·m handles abrupt load spikes to avoid stalls at startup. A rated current of 6 Arms limits continuous thermal stress and prolongs motor life under sustained use. The module’s continuous stall current of 6.9 Arms maintains holding torque at standstill that also secures loads when power is cut. A peak current of 25 Arms supplies high surge capacity, meeting sudden acceleration demands. A torque constant of 0.587 N·m/Arms ensures linear torque response which simplifies closed‑loop tuning. This servo type with a voltage constant of 20.5 V/min⁻¹ correlates back‑EMF with speed which refines velocity feedback accuracy.

A phase resistance of 0.41 Ω restricts excessive current draw which suppresses heat buildup during heavy duty. The drive’s rated power rate of 37 kW/s boosts dynamic response, thus accelerates position changes swiftly. With a rotor’s inertia of 2.73 ×10⁻⁴ kg·m², it lowers mechanical oscillations and enhances stability in start‑stop sequences. The device’s aluminum plate dimensions of t20×305 mm add structural rigidity and maintains housing alignment under torque load. A maximum speed of 5000 min⁻¹ extends the working envelope which accelerates high‑speed indexing. The Q2AA08100DXP3M servo module further carries an IP67 ingress protection rating due to which it resists dust and water ingress in wash‑down settings.