Q2AA08075HXP5S Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki Q2AA08075HXP5S is a medium-inertia servo motor from the Q SANMOTION Servo Motors series with an 86mm flange size and 750W rated output. It is designed for a 200V supply voltage and has a maximum rotation speed between 3000 and 3500 min-1. This model features a reduced wiring absolute sensor (PA035C) and operates within a temperature range of 0 to 40°C with up to 90% relative humidity.
Internal Product Review
The Q2AA08075HXP5S is a Sanyo Denki Q SANMOTION servo motor with a medium-inertia design and 750 W rated output. The PA035C reduced wiring absolute sensor supports clean feedback integration and dependable positioning performance. Maximum rotation speed to 3500 min-1 makes this motor especially appealing for responsive servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q2AA08075HXP5S is a servo motor manufactured by Sanyo Denki for the Q SANMOTION Servo Motors series. Within industrial automation systems, the unit converts drive current into precise rotary motion for actuators that demand repeatable positioning and moderate mechanical damping. This model belongs to the Q Series, pairing its winding with encoder feedback so that motion controllers can synchronize speed and torque during conveyor, palletizer, or tool-changer cycles. By reducing velocity fluctuations, the motor helps maintain throughput and keeps dimensional tolerances within programmed limits.
An 86 mm square flange sets the mounting interface, allowing direct attachment to standard gearheads or machinery frames without adapters. The motor provides a continuous mechanical output of 750 W under nominal operating conditions. A stator designed for 200 V class drives minimizes insulation stress and allows the unit to work with common servo amplifiers on factory power systems. The rotor and stator provide a medium-inertia response, supporting smooth acceleration and stable movement of heavier loads. The peak shaft speed ranges from 3000 to 3500 rpm, allowing controllers to use the higher limit for rapid indexing while remaining within the motor’s operating limits. The motor is supplied without a holding brake, so an external clamping device is required when the load must remain stationary after power is removed.
Operation is permitted at ambient temperatures from 0 to 40 °C, which accommodates the conditions found in many industrial installations. Performance remains stable at a relative humidity of 90% or below without condensation. Rotor position is relayed by the PA035C encoder, allowing the connected drive to regulate shaft position, speed, and torque during closed-loop operation. This encoder is a reduced-wiring absolute sensor that carries power and position data through fewer conductors. The reduced conductor count simplifies cable routing through moving-axis carriers and compact machinery frames. Absolute position feedback also allows the controller to identify the rotor position after startup without requiring a complete homing cycle.
