Q2AA07050DXS00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki Q2AA07050DXS00 is part of the Q SANMOTION Servo Motors series and features a medium-inertia design with a flange size of 76 mm. It has a rated output of 500 W, operates on a 200 V supply, and can reach rotation speeds between 4500 and 5000 min-1. The motor uses a reduced wiring incremental encoder and supports sensor models PP031, PP038, and PP062.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q2AA07050DXS00 is a servo motor produced by Sanyo Denki for the Q SANMOTION Servo Motors series. As a rotary actuator inside automated machinery, the unit converts electrical energy into controlled torque and speed so that positioning stages, feed drives, and index tables can follow precise motion commands. It belongs to the company’s Q Series platform and can be integrated with compatible drive packages. Its compact size and moderate inertia support controlled acceleration and repeatable cycle times without excessive overshoot.
The mounting interface uses a 76 mm square flange, allowing the motor to fit machines designed for this flange dimension without adapter plates. Its rotor and stator combination provide medium inertia, so acceleration profiles balance quick response with stable load matching. Rated mechanical output reaches 500 W, providing continuous shaft power when the motor operates from a 200 V motor supply. During peak demand, rotational velocity can be commanded within a range of 4,500 to 5,000 rpm. This speed range allows the controller to select an operating point that balances torque and throughput. The motor does not include a holding brake, so external mechanical locking may be required when a stationary load must remain secure after motor power is removed.
Continuous operation is supported at ambient temperatures from 0 to 40 °C. Conformal coatings and seals allow operation at a relative humidity of up to 90% without condensation. Shaft position is measured by a factory-installed reduced-wiring incremental encoder, which reduces the required cable core count while providing high-resolution quadrature feedback. The available encoder variants are PP031, PP038, and PP062, allowing selection based on controller line-driver compatibility or resolution requirements. The motor’s electrical pinouts and alarm codes align with compatible SANMOTION Q amplifiers, supporting communication between the feedback device and the drive. Proper enclosure ventilation and moisture control are still required to keep the surrounding air within the permitted temperature and humidity limits during continuous service.
