Q2AA07040DXS0E Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki Q2AA07040DXS0E is a medium-inertia servo motor from the Q SANMOTION Servo Motors series. It features a 76 mm flange size and a rated output of 400W, designed to operate at a supply voltage of 200V. The motor supports a maximum rotation speed of 4500 to 5000 min-1 and uses a reduced wiring incremental encoder sensor.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q2AA07040DXS0E servo motor is produced by Sanyo Denki within the Q SANMOTION Servo Motors series. It is built for closed-loop speed and position control in mid-range automation axes, where compact frame dimensions and moderate power allow direct coupling to conveyor sections, packaging actuators, or material-handling gantries. The unit converts electrical commands from a 200 V drive into shaft rotation regulated through an internal encoder, delivering precise torque for repetitive industrial cycles. This closed-loop arrangement allows the amplifier to monitor actual movement and correct deviations caused by changing loads.
Rated continuous mechanical output reaches 400 W, so the motor can sustain this power without thermal derating when matched to a compatible amplifier. The stator is wound for a nominal 200 V three-phase AC supply, allowing direct connection to standard servo drives in 200 V class cabinets. A mounting flange measuring 76 mm centers the frame on gearboxes or brackets while maintaining the required mounting alignment. Peak operating speed spans 4500 to 5000 rpm, providing headroom for rapid indexing or velocity regulation across a wide process range. The shaft is supplied without a brake, so the drive or an external mechanical latch must provide any required holding function when power is removed.
The permitted ambient temperature range is 0 to 40 °C; operation outside this range requires additional cooling or enclosure conditioning. The motor accepts up to 90% relative humidity when condensation is prevented. Its medium-inertia rotor balances quick acceleration with load-smoothing behavior that is useful in indexing tables and similar equipment. Position feedback is generated by a reduced-wiring incremental encoder, allowing the drive to track rotor movement without an unnecessarily large feedback cable. The available encoder sensor types are PP031, PP038, and PP062, supporting different resolution or cable-layout requirements. Proper amplifier matching remains necessary to supply the specified voltage, process the selected feedback signal, and regulate the motor throughout its operating range.
